3kw Wind Turbine

March 9, 2010 · 10 comments

in wind energy


www.energy-creation.co.uk

This is energy creation’s ‘baby 3′ our 3kW Wind Turbine

{ 10 comments… read them below or add one }

1 cycloneCJproducts March 9, 2010 at 10:19 am

is that Steve Irwin?????  Crieken!!!

2 bendersgreathaha March 9, 2010 at 11:16 am

Whats with the constantine wire on the wall?

3 techforumz March 9, 2010 at 11:19 am

Probably 220V or 24V. Those are the main ones. Also, that one wasn’t mounted right, if I’m not mistaken. Aren’t those supposed to be mounted at least 30 feet above any obstructions within 300 feet radius?

4 fakiir March 9, 2010 at 11:50 am

the beauty of the VAWT design is that it can take wind from all directions at once. so the mounting guidelines are really quite open ended. they are ideal for residential rooftops, building roofs. etc. they still preform best in clean air, but VAWT is the type to look at if you don’t have the acreage to allow for the “fall zone” for a 60-70 foot tower.

5 johnnecron March 9, 2010 at 12:12 pm

SO true even putting one in your basement will turn from just the movement of the rats running across the floor. We call that rat wind power.

6 techforumz March 9, 2010 at 12:13 pm

3000W = 220V * 13.7Ah. Although this is not enough for constant use of 220V appliances (30Ah), those are not always on. Also, 110V doubles the amperage to (27Ah), which is more than enough for standard (15Ah/20Ah). Answer your question?

7 GTWCMT March 9, 2010 at 12:26 pm

Um one thing, think of a 13 amp plug on most appliances. so you have the right sort of though but it wrong.it would power household appliances not taking into account that most things dont actually run at 22V and 30 AMP’s

8 meadoluv March 9, 2010 at 12:44 pm

rating a wind turbines, means the maximum open circuit voltage multiplied by the maximum short circuit current that gives the max rated Watts of power.

9 Dennis5587 March 9, 2010 at 1:30 pm

What does that honestly matter?  Volts mean nothing without knowing the amp’s… All watts are is just volts x amps. You can always convert the volts to what ever you need.

10 johnnecron March 9, 2010 at 2:30 pm

That is only true in a pure resistance circuit.when you have inductance in the equation such as motors, I * E does not equal P

Leave a Comment

Spam Protection by WP-SpamFree

Previous post:

Next post: