Texas Plastics Recycling

January 22, 2010 · 0 comments

in recycling

Plastics Recycling


Plastic recycling is the process of recovering scrap or waste plastics and reprocessing the material into useful products, sometimes completely different in form from their original state. For instance, this could mean melting down soft drink bottles then casting them as plastic chairs and tables.


Before recycling, plastics are sorted according to their resin identification code, a method of categorization of polymer types, that was developed by the Society of the Plastics Industry in 1988. Polyethylene terephthalate, commonly referred to as PET, for instance, has a resin code of 1.


Plastics products are ubiquitous throughout the world. As dependency upon these light weight and durable products increased, so too has the need for global innovation in recycling technologies. Over the decades recycling companies developed a variety of processes to turn discarded plastics into hundreds of products from paint brushes to rugs and pillows, boat hulls and railroad ties.


When compared to other materials like glass and metal materials, plastic polymers require greater processing to be recycled.[citation needed] Plastics have a low entropy of mixing, which is due to the high molecular weight of their large polymer chains. A macromolecule interacts with its environment along its entire length, so its enthalpy of mixing is large compared to that of an organic molecule with a similar structure. Heating alone is not enough to dissolve such a large molecule; because of this, plastics must often be of nearly identical composition in order to mix efficiently.


When different types of plastics are melted together they tend to phase-separate, like oil and water, and set in these layers. The phase boundaries cause structural weakness in the resulting material, meaning that polymer blends are only useful in limited applications.


Another barrier to recycling is the widespread use of dyes, fillers, and other additives in plastics. The polymer is generally too viscous to economically remove fillers, and would be damaged by many of the processes that could cheaply remove the added dyes. Additives are less widely used in beverage containers and plastic bags, allowing them to be recycled more frequently.


The use of biodegradable plastics is increasing. If some of these get mixed in the other plastics for recycling, the reclaimed plastic is not recyclable because the variance in properties and melt temperatures. [1]


Many such problems can be resolved by using a more elaborate monomer recycling process, in which a condensation polymer essentially undergoes the inverse of the polymerization reaction used to manufacture it. This yields the same mix of chemicals that formed the original polymer, which can be purified and used to synthesize new polymer chains of the same type. Du Pont opened a pilot plant of this type in Cape Fear, North Carolina, USA, to recycle PET by a process of methanolysis, but it closed the plant due to economic pressures.[2]


Another potential option is the conversion of assorted polymers into petroleum by a much less precise thermal depolymerization process. Such a process would be able to accept almost any polymer or mix of polymers, including thermoset materials such as vulcanized rubber tires and the biopolymers in feathers and other agricultural waste. Like natural petroleum, the chemicals produced can be made into fuels as well as polymers. A pilot plant of this type exists in Carthage, Missouri, USA, using turkey waste as input material. See the main article on thermal depolymerization. Gasification is a similar process, but is not technically recycling since polymers are not likely to become the result.


Recently, a process has also been developed in which many kinds of plastic can be used as a carbon source in the recycling of scrap steel.[3]


Yet another process that is gaining ground with startup companies (especially in Australia, United States and Japan) is heat compression.[citation needed] The heat compression process takes all unsorted, cleaned plastic in all forms, from soft plastic bags to hard industrial waste, and mixes the load in tumblers (large rotating drums resembling giant clothes dryers). The most obvious benefit to this method is the fact that all plastic is recyclable, not just matching forms. However, criticism rises from the energy costs of rotating the drums, and heating the post-melt pipes.

John Thompson is owner of Southwest Plastics Recycling in East Texas. For more information visit Texas Plastics Recycling Texas Plastics Recyclingand Southwest Plastics Recycling Southwest PLastics recycling

Leave a Comment

This blog is kept spam free by WP-SpamFree.

Previous post:

Next post:

</